Zebra Technologies
ZTC ZD421-203dpi ZPL

View Printer Configuration

  +15.0               DARKNESS          
  LOW                 DARKNESS SWITCH   
  4.0 IPS             PRINT SPEED       
  +000                TEAR OFF ADJUST   
  TEAR OFF            PRINT MODE        
  GAP/NOTCH           MEDIA TYPE        
  TRANSMISSIVE        SENSOR SELECT     
  THERMAL-TRANS.      PRINT METHOD      
  832                 PRINT WIDTH       
  0458                LABEL LENGTH      
  39.0IN   988MM      MAXIMUM LENGTH    
  MAINT. OFF          EARLY WARNING     
  NOT CONNECTED       USB COMM.         
  AUTO - DTE          SER COMM. MODE    
  9600                BAUD              
  8 BITS              DATA BITS         
  NONE                PARITY            
  XON/XOFF            HOST HANDSHAKE    
  NONE                PROTOCOL          
  NORMAL MODE         COMMUNICATIONS    
  <~>  7EH            CONTROL PREFIX    
  <^>  5EH            FORMAT PREFIX     
  <,>  2CH            DELIMITER CHAR    
  ZPL II              ZPL MODE          
  INACTIVE            COMMAND OVERRIDE  
  CALIBRATION         MEDIA POWER UP    
  FEED                HEAD CLOSE        
  DEFAULT             BACKFEED          
  +000                LABEL TOP         
  +0000               LEFT POSITION     
  DISABLED            REPRINT MODE      
  056                 WEB SENSOR        
  096                 MEDIA SENSOR      
  067                 RIBBON SENSOR     
  000                 TAKE LABEL        
  039                 MARK SENSOR       
  004                 MARK MED SENSOR   
  043                 TRANS GAIN        
  031                 TRANS LED         
  000                 RIBBON GAIN       
  040                 MARK GAIN         
  080                 MARK LED          
  DPCSWFXM            MODES ENABLED     
  ........            MODES DISABLED    
   832 8/MM FULL      RESOLUTION        
  6.7                 LINK-OS VERSION   
  V93.21.16Z <-       FIRMWARE          
  1.3                 XML SCHEMA        
  7.0.1               HARDWARE ID       
  8176k............R: RAM               
  65536k...........E: ONBOARD FLASH     
  NONE                FORMAT CONVERT    
  FW VERSION          IDLE DISPLAY      
  05/05/24            RTC DATE          
  16:02               RTC TIME          
  DISABLED            ZBI               
  2.1                 ZBI VERSION       
  READY               ZBI STATUS        
  151 LABELS          NONRESET CNTR     
  151 LABELS          RESET CNTR1       
  151 LABELS          RESET CNTR2       
  787 IN              NONRESET CNTR     
  787 IN              RESET CNTR1       
  787 IN              RESET CNTR2       
  1,999 CM            NONRESET CNTR     
  1,999 CM            RESET CNTR1       
  1,999 CM            RESET CNTR2       
  002 WIRED           SLOT 1            
  0                   MASS STORAGE COUNT
  0                   HID COUNT         
  OFF                 USB HOST LOCK OUT